Skip to main content
Schneider Electric LXM16MU07M2X

Schneider Electric LXM16MU07M2X Servo Drive, 0.75 kW

MPN LXM16MU07M2X
Active

Schneider Electric Easy Lexium 16 motion servo drive, LXM16MU07M2X, 0.75 kW at 220 V, single-phase 200-240 V input, 5.1 A continuous output, 8 kHz switching frequency, Modbus, compact housing.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LXM16MU07M2X specifications
ParameterValue
Main product or component typeMotion servo drive
Voltage1000...2000 m with current derating
Current7.9 A 166.7 % at 220 V, single phase
Frequency8 kHz

Product details

The LXM16MU07M2X is a motion servo drive from Schneider Electric's Easy Lexium 16 line, sized for 0.75 kW nominal power at 220 V with an 8 kHz switching frequency — that 8 kHz carrier quiets the motor whine without derating the continuous output current, which is rated 5.1 A. It runs on single-phase 200-240 V supply (rated 220 V -15/+10 %) and draws 7.9 A line current at 166.7 % overload — the 3-second peak output hits 20 A, so it handles short torque bursts for indexing or clamping moves without tripping.

Mounting and supply — single-phase convenience, no EMC filter

Compact housing format means it fits tight subpanels — the drive is intended for single-phase line supply, so it skips the three-phase transformer and saves cabinet space. Note the 'no EMC filter' variant: you'll need an external filter (or a shielded motor cable with ferrite) to meet EN 61800-3 conducted emissions limits — budget that into the panel layout. Supply frequency tolerance is 50/60 Hz ±5 %, with a network frequency window of 47.5-63 Hz — stable for most mains, but a generator set with loose frequency regulation might need a wider-range drive.

Peak current and overload — what the 166.7 % number means on the line

The 7.9 A line current at 166.7 % overload isn't the continuous draw — it's the peak the drive pulls from the mains during acceleration or load transients. Continuous line current is lower; the continuous output current to the motor is 5.1 A. That 20 A peak output (3 s) gives real headroom for applications like a small indexing table or a pick-and-place axis that needs a short burst of torque — the drive won't fold back on a momentary load spike.

MPN
LXM16MU07M2X