Skip to main content
Schneider Electric LXM23AU45M3X

Schneider LXM23AU45M3X Lexium 23 Plus Servo Drive, 4.5 kW

MPN LXM23AU45M3X
Active

Schneider Electric Lexium 23 Plus motion servo drive, LXM23AU45M3X, 4.5 kW at 220 V, 32.5 A continuous output, three-phase 170…255 V input, CAN interface, book format.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LXM23AU45M3X specifications
ParameterValue
Main product or component typeMotion servo drive
Frequency50...60 Hz - 5...5 %

Product details

4.5 kW at 220 V — sizing the motor pair

The LXM23AU45M3X: Rated 4.5 kW continuous power at 220 V three-phase input, with a continuous output current of 32.5 A. That current figure is the one to match against the motor's rated current at the drive's switching frequency — the drive's I²t limit, not the power label, governs the thermal headroom for the application. Supply voltage tolerance is -20…15 % on the 220 V nominal, so it accepts 170…255 V three-phase without a transformer tap change.

Book format and altitude derating — panel fit

Book format means the drive mounts with the wide face vertical, stacking side-by-side on the backplate. For a retrofit into an existing Lexium 23 cabinet, the footprint matches the original cutout and DIN-rail clip positions — no need to re-drill the subplate. Rated for installation up to 1000 m altitude without derating. Above that, continuous power drops 1 % per 100 m — at 2000 m the drive delivers roughly 90 % of its 4.5 kW rating. Factor this into the motor torque budget if the cabinet sits at elevation.

CAN interface and leakage current — integration notes

The drive communicates via CAN — the Lexium 23 Plus family uses CANopen DS-402 for motion control. If the existing line runs CAN, this drive drops into the network without a gateway. Maximum leakage current to earth is 3.5 mA, which is low enough that a standard 30 mA RCD on the supply will not nuisance-trip unless multiple drives share the same residual-current device.

MPN
LXM23AU45M3X