Skip to main content
Schneider Electric MH30702P12A2200

Schneider Electric MH30702P12A2200 Servo Motor, 1380 W

MPN MH30702P12A2200
Active

Schneider Electric MH30702P12A2200 servo motor, three-phase, 1380 W continuous power, 5500 rpm nominal speed, IP65, multiturn SinCos Hiperface encoder, 70 mm flange, without brake.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MH30702P12A2200 specifications
ParameterValue
Encoder typeMultiturn SinCos Hiperface
Shaft end typeParallel key
Main product or component typeServo motor
IP ratingIP65
Length6.06 in (154 mm)
Shaft diameter0.4 in (11 mm)
Centring collar diameter2.4 in (60 mm)

Product details

1380 W, 5500 rpm — high-speed servo for dynamic axes

The MH30702P12A2200 is a three-phase servo motor from the Schneider Electric MH3 series, delivering 1380 W continuous power at 5500 rpm nominal speed. The 70 mm flange and 154 mm body length fit compact axis layouts where cycle time drives the machine throughput.

Torque and drive compatibility across supply voltages

Nominal torque ranges from 2.37 Nm at 115 V three-phase down to 1.89 Nm at 480 V three-phase, with corresponding continuous stall torque of 2.48 Nm across the same voltage range. Peak stall torque reaches 7.4 Nm for short-term overloads during acceleration. The torque constant is 0.84 Nm/A at 120 °C copper temperature, and the back EMF constant is 54.08 V/krpm. Stator resistance is 3.84 Ω with inductance 12.19 mH — these values define the drive tuning parameters for current loop stability. Maximum continuous current is 2.94 A, with a 3-second peak of 9.65 A. The motor is naturally convection cooled (no fan), so the duty cycle must account for the thermal time constant of the winding at 135 °C hot-spot temperature.

IP65, radial load limits, and mounting

IP65 standard protection means the motor body resists dust ingress and low-pressure water jets — suitable for washdown or dusty production environments. The rotatable right-angled connectors simplify cable routing in tight panels. Maximum radial force on the shaft derates with speed: 710 N at 1000 rpm, dropping to 390 N at 6000 rpm. For belt-driven or overhung loads, the application must stay within this envelope to avoid bearing overload. The shaft is 11 mm diameter with a parallel key and 23 mm key length. Mounting uses an international standard flange with 60 mm centring collar and 5.5 mm mounting holes. No holding brake is fitted on this variant — the load must be held by the drive's holding torque or an external brake.

MPN
MH30702P12A2200