Skip to main content
Schneider Electric ATV21HD18M3X

Schneider Electric ATV21HD18M3X Altivar 21 VFD, 18.5 kW, 200

MPN ATV21HD18M3X
Active

Schneider Electric Altivar 21 variable speed drive, ATV21HD18M3X, 18.5 kW / 25 HP, 200-240 V 3-phase, IP20, with heat sink.

$1,423.67 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV21HD18M3X specifications
ParameterValue
Connector type1 RJ45
Main product or component typeVariable speed drive
Voltage= 1 mOhm 500 V DC for 1 minute
Current55.8 A 240 V 67.3 A 200 V
Frequency6...16 kHz adjustable 8...16 kHz with derating factor
Phases3-phase
Temp storage max70 °C
Temp storage min-25 °C
Temp operating max40 °C
Temp operating min-10 °C
Storage temperature-13...158 °F (-25...70 °C)
Pollution degreePollution degree 2
Depth7.5 in (190 mm)
Width9.6 in (245 mm)
Height13.0 in (329.5 mm)
Data format8 bits, 1 stop, odd even or no configurable parity
Operating positionVertical +/- 10 degree
Operating temperature14...104 °F (-10...40 °C) without derating 104...122 °F (40...50 °C) with derating factor

Product details

The ATV21HD18M3X is an Altivar 21 variable speed drive sized for a 18.5 kW asynchronous motor on a 200-240 V three-phase supply. Line current draws 55.8 A at 240 V, so the upstream protection and cabling need to be rated for that draw. The switching frequency is adjustable from 6 to 16 kHz; running above 8 kHz requires derating the output current, which matters if you are trying to quiet a motor on a fan or pump load. The drive includes an adjustable PI regulator for closed-loop process control, and the Modbus RTU over RS-485 interface runs at 9600 or 19200 bps with RTU framing. For building management integration, optional communication cards support BACnet, LonWorks, Metasys N2, or APOGEE FLN.

The drive is assembled with a heat sink and must be mounted vertically within ±10 degrees. Operating altitude is limited to 1000 m standard, with derating up to 3000 m; note the 2000 m restriction for corner-grounded distribution networks. Pollution degree 2 per IEC 61800-5-1 applies, meaning the enclosure is suitable for typical control-room environments.

MPN
ATV21HD18M3X