The ABB 3ABD00038205-D is an ACS880-01 wall-mounted single drive in Frame R6, sized for a 55 kW motor under normal (constant-torque) duty at 105 A output. For heavy-duty applications — typical of conveyors, crushers, or extruders — the drive delivers 45 kW at 87 A. The 380 to 415 V three-phase input matches standard European low-voltage networks; the 47.5 to 63 Hz input frequency covers 50 Hz and 60 Hz grids without derating. IP21 and NEMA Type 1 enclosure suits clean, indoor panel environments — not washdown or dust-laden areas.
Load matching and derating
The normal-use 105 A rating applies when the motor is lightly loaded or the duty cycle allows thermal recovery. IE2 efficiency level is the drive's own loss classification, not the motor's — expect around 97–98% drive efficiency at rated load. If the application requires sustained overload above 87 A, the drive will trip on overcurrent; the 105 A normal-use figure is not a continuous overload capacity.