Drive module for 250 kW motor loads
The 3ABD00039321-D is an ABB ACS880-04 LV AC industrial single drive module rated for 250 kW normal-use output power and 505 A output current, fed from a 380-415 V three-phase supply. It carries an IE2 efficiency level and IP20 protection, mounted in a frame size R10 enclosure. This is the module that sits inside a larger drive cabinet — you spec it when the line needs 250 kW continuous and the motor can handle the 505 A full load.
Normal-use rating is 250 kW at 505 A. For heavy-duty applications — constant torque loads like conveyors or extruders — the drive delivers 200 kW at 361 A. Light-overload use (variable torque, pumps, fans) matches the normal-use power at 250 kW but with a slightly lower current of 485 A, reflecting the different thermal profile. The heavy-duty number is the one to check if your motor sees sustained high torque at low speed; the normal-use figure covers most centrifugal loads.
Physical and environmental fit
Frame size R10 defines the mechanical envelope — bolt pattern, busbar spacing, and cooling duct alignment. IP20 means it's intended for enclosure mounting, not standalone floor placement. The frequency range of 47.5 to 63 Hz covers 50 Hz and 60 Hz grids globally. Open-type NEMA enclosure means it relies on the surrounding cabinet for personnel protection.