The ABB 3ABD00046982-D is a wall-mounted single drive for 3-phase LV AC industrial applications. It delivers 18.5 kW output power at 38 A under normal use, with a heavy-duty rating of 15 kW at 32 A for constant-torque loads. Input voltage is 380 to 415 V, frequency range 47.5 to 63 Hz. Enclosure is NEMA Type 1 with IP21 protection. Frame size R3 governs the physical footprint. Efficiency class IE2 means this drive meets the minimum standard for most industrial installations in regions where IE2 is still accepted for fixed-speed applications; for variable-torque loads the drive's own losses are already low, but if your site mandates IE3 or IE4 for the motor-drive system, confirm the system-level efficiency target.
The 38 A normal-use output current is the figure to size input fusing and cable cross-section for continuous duty. Heavy-duty 32 A applies when the load profile includes frequent starts, stops, or sustained overload — a common case for conveyors, crushers, or extruders. Light-overload 36 A sits between the two and is the rating to use for centrifugal pumps and fans where the torque demand drops at lower speeds. IP21 and NEMA Type 1 mean the drive is not sealed against hose-down or dust ingress. Mount it inside a panel or in a climate-controlled electrical room. The wall-mounted format with frame R3 expects four-point fixing.