The 3ABD00048172-D is an ABB ACS880-01 industrial drive, 3-phase input, rated 380-415 V, 1.1 kW normal-use output at 3.3 A. It's wall-mounted, IP21, NEMA 1, frame size R1, and covers 48-63 Hz. This one also carries position control onboard — that's the +N5700 option, so it's not a plain V/Hz box; it's meant for applications where you need closed-loop positioning without an extra motion controller.
Normal-use (heavy-duty) output is 1.1 kW / 3.3 A; that's the continuous rating for constant-torque loads like conveyors or extruders. Light-overload use drops to 3.1 A at the same 1.1 kW — that's for variable-torque fans and pumps where you don't need the full current margin. Heavy-duty use at 0.75 kW / 2.4 A covers the high-starting-torque stuff like crushers or mixers. If you're sizing for a 0.75 kW motor on a hard-start application, this drive fits; for a 1.1 kW fan, it fits. The frame R1 keeps the footprint small — about the size of a shoebox.
Wall-mounted, IP21, NEMA 1 — clean indoor use only. No washdown, no dust. The enclosure is Type 1, so it's for general-purpose indoor locations. If you need IP54 or outdoor, this isn't it. Install with clearance for airflow; the R1 frame dissipates heat through the backplate. Keep the ambient below 40 °C for full current rating.
WEEE compliance
Classified under WEEE Category 4 (Large Equipment, any external dimension >50 cm). That means end-of-life disposal follows the EU WEEE directive for industrial gear. Not a selection factor, but it matters for compliance documentation if you're shipping into Europe.