The ABB 3ABD00048203-D is a wall-mounted drive rated for 200 kW normal-use output at 430 A on a 380–415 V three-phase supply. It carries position control onboard for coordinated motion or precise stopping without an external controller.
The drive lists three duty points. Heavy-duty use (PhD 200 kW, IhD 363 A) is the same power but lower current — that's your margin for overload cycles on a crusher or extruder. Light-overload use (PlD 200 kW, IlD 400 A) sits between them. All three share the same power figure, so the motor selection is driven by the current profile, not the kW number.
IP21 and NEMA Type 1 suit indoor, dry locations. The wall-mounted form factor saves floor space but requires clearance around the R9 frame for airflow and cable bending radius.
Compliance documentation
The WEEE category is 4 (Large Equipment), which covers end-of-life take-back obligations in EU markets. RoHS, REACH, and UL documentation are standard for ABB drives of this series but are not listed in the spec record — request them with your RFQ if your compliance gate requires them.