The ABB 3ABD00058013-D is a wall-mounted single drive rated for 5.5 kW normal-use output at 12.9 A on a 380–415 V three-phase supply. It carries a heavy-duty rating of 4 kW at 10 A and a light-overload rating of 5.5 kW at 12 A. Frame size R1 is the smallest frame in the wall-mounted range, sized for panel layouts where space is tight. The drive is wall-mounted, open type, with IP20 protection.
Duty ratings — which one governs your motor
The normal-use rating (5.5 kW, 12.9 A) is the one to use for most constant-torque industrial loads — fans, pumps, compressors running within a standard duty cycle. The heavy-duty rating (4 kW, 10 A) applies when the drive must deliver higher starting torque or handle momentary overloads, typical for conveyors with breakaway loads or mixers with viscous starts. The light-overload rating (5.5 kW, 12 A) is a close match to normal use but with a slightly lower current ceiling; in practice, normal use is the conservative choice for continuous operation.
Input power and frequency range
Input voltage is 380–415 V three-phase, with a frequency range of 47.5 to 63 Hz.