Drive selection note for a 0.75 kW motor
The ABB 3ABD00058827-D is an ACS880-01 wall-mounted drive sized for a 0.75 kW 3-phase induction motor on 380-415 VAC supply. Normal-use output current is 2.4 A, which covers most standard IEC motors at that power. If the load profile includes short-term overloads, the heavy-duty rating of 0.55 kW at 1.8 A gives the headroom for conveyors or pumps that cycle hard. Light-overload use matches the normal-use power at 0.75 kW but draws 2.3 A — a slight derating from the 2.4 A continuous figure, likely for applications with sustained high torque at low speed.
IP21 enclosure with NEMA Type 1 rating means it's suited for indoor, clean environments — no washdown or dust. Wall-mounted frame R1 keeps the footprint compact; verify clearance for cabling and cooling airflow per the installation manual.
Efficiency and frequency range
Rated IE2 efficiency level meets the minimum for most industrial applications in regions without mandatory IE3 requirements. Frequency input range of 47.5 to 63 Hz covers both 50 Hz and 60 Hz mains without derating.