The 3ADT218519S0211: Frame H2 defines the mechanical envelope and mounting pattern — verify panel cutout and bus-bar spacing against the DCS880 installation manual for the H2 frame. The unit operates on 50 Hz line frequency, consistent with IEC-standard industrial mains. Three analog inputs and two analog outputs are available for speed/torque reference and feedback — adequate for a single-motor drive cell but not for multi-axis coordination without additional I/O. Acoustic noise is specified at 55 dB(A) — within typical limits for a forced-cooled drive of this power class, but worth noting if the drive is installed in a noise-sensitive area. The IP00 protection on auxiliary terminals means the converter is intended for enclosure mounting; the main power circuit's degree of protection follows IEC 60529 and IEC 60947-1, which for this frame generally assumes a closed cabinet. Operating humidity range of 5 to 95 % RH (non-condensing) covers most indoor industrial environments; no special derating is required for standard plant-floor conditions.
3ADT218519S0211 ABB DCS880-S02-0150-04 DC Converter, 400 VAC
MPN3ADT218519S0211
Active
ABB DCS880-S02-0150-04, 4Q DC converter, 400 VAC, 150 A, Frame H2, 55 dB(A).
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Frequency | 50 Hz |
| Parameter | Value |
|---|---|
| Frame size | H2 |
| Degree of protection (IP) | acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP00 |
| Parameter | Value |
|---|---|
| Sound | 55 dB(A) |
| Analog inputs | 3 |
| Analog outputs | 2 |
| Operating humidity (RHamβ) | 5...95% |
Product details
Frequently asked questions
What is the frame size of this converter?
The frame size is H2. This determines the physical mounting dimensions and bus-bar layout; refer to the DCS880 hardware manual for the exact drilling plan and clearance requirements.
What is the sound level of this unit?
The sound pressure level is rated at 55 dB(A). This is typical for a fan-cooled DC drive of this rating and should be considered if the drive is placed in a low-noise area.
What compliance documentation is available for this part?
The converter carries protection ratings per IEC 60529, IEC 60947-1, and EN 60529. The auxiliary terminals are rated IP00. For RoHS, REACH, and UL documentation, these are typically provided by ABB on request or via their product compliance portal; the evidence does not list specific cert numbers.
MPN
3ADT218519S0211