The ABB 3ADT218567S0161 is a DCS880-S01-5200-04R DC converter rated for 400 VAC input, delivering 5200 A output in a 2-quadrant configuration. Frame size H8 determines the mechanical footprint and busbar interface — verify panel cutout and mounting dimensions against your existing layout before committing the BOM line.
Rated for 50 Hz line frequency. The 2-quadrant design handles motoring and regenerative braking in one direction of torque and speed — typical for unwinding or overhauling loads where controlled deceleration recycles energy back to the DC bus. Three analog inputs and two analog outputs are available for speed/current reference and feedback loops; plan your control wiring accordingly. The auxiliary terminals carry an IP00 protection rating per IEC 60529 and IEC 60947-1 — meaning no enclosure at the terminals themselves, so the panel or cabinet must provide the environmental seal. Sound level is listed at 82 dB(A) — factor this into installation planning if the drive cabinet is near occupied areas or noise-sensitive equipment. Operating humidity range of 5 to 95% RH covers most indoor industrial environments without derating.