Drive identity and duty ratings
It delivers 2.2 kW output power at 5.6 A under normal use, with a heavy-duty rating of 1.5 kW at 4.0 A. Input is 380-480 V three-phase, 47.5-63 Hz, and the drive carries an IE2 efficiency level. Frame size R1, wall-mounted, IP21 with NEMA Type 1 enclosure. That means it's splash-resistant and suited for indoor installation away from washdown spray. Ambient max is 40 °C, and it'll operate up to 4000 m altitude without derating concerns for most installations.
The drive carries 2 analog inputs, 2 analog outputs, and 6 digital inputs with 3 digital outputs. That's enough for a basic pressure transducer, a setpoint, and a run/fault handshake to a PLC. Communication is via CAN bus — no onboard Ethernet, so if you need Modbus TCP or PROFINET, you'll be adding an option module. Standby loss sits at 14 W, and total power consumption at rated load is 85 W. The control unit is included. The internal lithium coin cell (CR2032, 220 mAh) keeps the real-time clock and parameter backup alive during power-down. Sound level is 59 dB(A) — quiet enough for a pump room but not silent.