It delivers 1.1 kW normal-use output at 3.3 A from a 380–480 V three-phase supply, with a heavy-duty rating of 0.8 kW at 2.6 A. The IP55 Type 12 enclosure handles washdown environments; frame size R1 keeps the footprint tight on the wall.
Three duty classes let you match the drive to the pump or fan curve. Normal use (1.1 kW, 3.3 A) covers centrifugal loads; light-overload use (1.1 kW, 3.1 A) is nearly identical but with slightly lower current headroom; heavy-duty use (0.8 kW, 2.6 A) handles constant-torque profiles like screw pumps or conveyors. The 0.98 power factor and IE2 efficiency level keep line losses low. Standby loss is 14 W, so the drive doesn't waste much heat when the process is idle.
Two analog inputs and two analog outputs handle transducer signals typical in water treatment. Six digital inputs and three digital outputs manage start/stop, fault reset, and status feedback. Communication is CAN-based — no onboard Ethernet. The lithium coin cell (CR2032, 220 mAh) keeps the real-time clock alive during power loss.