The ABB 3AXD50000041424 is a general-purpose cabinet-built drive for three-phase 380 to 480 V supplies. It delivers 132 kW / 246 A under normal (light-overload) duty and 110 kW / 206 A under heavy-duty use, with an apparent power output of 170 kV·A. Frame size R8, IP21 enclosure (NEMA Type 1), rated for a maximum ambient of 40 °C and 5 to 95 % humidity. The drive includes a control unit and is cabinet-built — the ecodesign exemption applies per EU/2019/1781 §2.3.e, so no energy-efficiency class is listed.
The normal-use current of 246 A (light-overload, 234 A) is the figure to match against your motor FLA for continuous duty; the heavy-duty 206 A line governs constant-torque loads like conveyors or extruders. UL ratings parallel the IEC ones: 200 Hp / 240 A light-overload, 150 Hp / 180 A heavy-duty at 480 V. Analog I/O: 2 inputs, 2 outputs. Digital I/O: 6 inputs, 3 outputs. Communication is CAN.
The SCIP number is 182c528b-29d6-4b33-89d3-2ec8b482ca1d Finland for EU waste reporting.
Installation notes
Cabinet-built means it arrives as a complete assembly; mount it in place, land the incoming three-phase supply, and connect the motor. The internal lithium coin cell (CR2032, 220 mAh, 3 V) backs the real-time clock and parameter storage — replace it during long-term storage if the drive sits unpowered for years. Sound level is 65 dB(A) at rated load — not silent, but typical for a drive of this frame. The enclosure is IP21, so it's protected against fingers and dripping water; not suitable for washdown areas without additional enclosure.