The ABB 3AXD50000041426 is a general-purpose cabinet-built drive rated for 200 kW normal use at 363 A output on a 380–480 V three-phase supply. It ships as a complete cabinet with the control unit included, frame size R9, IP21 with NEMA Type 1 enclosure. The heavy-duty rating is 160 kW / 293 A, and the light-overload rating is 200 kW / 345 A. UL ratings are 250 Hp / 302 A heavy-duty and 300 Hp / 361 A light-overload.
For higher-torque starts or shock loads, the heavy-duty curve drops to 293 A; that's the number to use when sizing for a crusher or extruder. The apparent power output of 251 kVA gives the transformer or generator sizing figure. Ambient must stay at or below 40 °C; above that, derate per the standard curve. The drive draws 5868 W at rated load, so factor that into panel cooling. The 2 analog inputs and 2 analog outputs handle speed reference and feedback signals. The 6 digital inputs and 3 digital outputs cover start/stop, fault reset, and status. Communication is CAN-based; there is no onboard industrial Ethernet port, so if you need Profinet or EtherNet/IP, plan for an external gateway or option module.
Cabinet-built means it arrives as a self-contained enclosure — no separate panel build needed. Mounting is floor-standing; the R9 frame is sized for a 200 kW drive. The IP21 / NEMA 1 rating allows indoor installation in clean, dry environments. Operating humidity range is 5 to 95% non-condensing. The sound level is 68 dB(A) — noticeable but not deafening; ear protection is recommended for prolonged proximity.