ABB 3AXD50000047494 is an LV AC industrial wall-mounted regenerative single drive rated for 15 kW normal use, 32 A output, 22 kV·A apparent power, on 380–415 V 3-phase. Frame size R6, IP21 enclosure, IE2 efficiency.
Duty ratings and load handling
Three output current ratings let you size the drive to the actual load cycle. Normal use (In) is 32 A continuous, good for constant-speed fans or pumps. Heavy-duty use (IhD) drops to 25 A — that's your crunch number for a crusher or conveyor with short peak overloads. Light-overload use (IlD) runs 30 A for applications with infrequent excess. In practice, run the heavy-duty figure for any motor load that cycles hard; the drive will hold 25 A continuous without tripping. Standby loss is 49 W, sound level 71 dB(A) — plan for that if it's going into a quiet area.
What's on the unit
Comes with the control unit included. Two analog inputs, two analog outputs, six digital inputs and two digital outputs. CAN protocol on-board — no Industrial Ethernet port (listed as 0). That means if you need EtherNet/IP or PROFINET, you're adding an option module; for standalone or CAN-based line control, it's ready to wire. Wall-mounted, IP21, so splash protection but don't hose it down. Lithium coin cell (CR2032, 220 mAh, 3 V, two pieces) for real-time clock backup — easy to swap without sending the drive back.