ABB ACS560-01-106A-4, 55 kW, 106 A, 380-480 V, 3-phase, IP20, R5 frame, wall-mounted drive.
| Parameter | Value |
|---|---|
| Output power, normal duty | 55 kW |
| Output current, normal duty | 106 A |
| Output power, heavy duty | 45 kW |
| Output current, heavy duty | 87 A |
| Output power, light overload | 55 kW |
| Output current, light overload | 100 A |
| Apparent power output | 73 kV·A |
| Efficiency class (IE) | IE2 |
| Standby power loss | 24 W |
| Parameter | Value |
|---|---|
| Input voltage range | 380 ... 480 V |
| Number of phases | 3-phase |
| Frequency | 47 ... 63 Hz |
| Parameter | Value |
|---|---|
| Frame size | R5 |
| NEMA enclosure type | Open Type |
| Degree of protection (IP) | IP20 |
| Mounting type | Wall-mounted |
| Parameter | Value |
|---|---|
| Temperature rating (max.) | Maximum 40 °C |
The ABB ACS560-01-106A-4 (3AXD50000047655) is a 55 kW normal-use drive rated for 106 A continuous output on a 380-480 V three-phase supply. Heavy-duty use drops to 45 kW and 87 A, light-overload holds at 55 kW and 100 A. The R5 frame is wall-mounted, IP20 open type — no conduit entry, so plan for a gland plate or top-hat enclosure if the panel environment demands it.
The 73 kVA apparent power rating matches the 55 kW motor load at full flux. Standby loss is 24 W.
The drive is rated for installation at altitudes up to 1000 m without derating. Above that, standard IEC derating curves apply.
The frame size is R5. This is a wall-mounted unit, not a flange-mount or cabinet-embedded variant.
The WEEE category is 4 (Large Equipment). The enclosure is NEMA Open Type and IP20. The evidence does not list RoHS, REACH, or UL certifications; these are typically available from ABB's documentation portal for the ACS560 series.
No related articles