This is the ABB ACS880-04 drive module order code 3AXD50000448579 — a cabinet-building module rated for 800 kW normal use (1480 A output) on a 380–415 V three-phase supply. It's the heavy-lift end of the ACS880 family: the normal-use 1480 A is the number you size the mains cable and input fusing for, but the heavy-duty rating of 630 kW / 1107 A tells you what it can sustain on a hard industrial load like a crusher or centrifuge. The light-overload rating (800 kW / 1421 A) is essentially the same as normal-use, so this module is specced for continuous full-load, not short-peak cycles.
It's an Open Type module (NEMA) with IP00 protection — no enclosure of its own, so it goes inside a cabinet. The mounting type is 'Module for cabinet building', meaning it's designed to bolt onto a backplate or chassis inside a larger panel, not stand alone. At 800 kW you're looking at a cabinet that's well over a meter tall, with forced-air or water-cooling depending on the configuration. The 50/60 Hz rating is standard for global use — no derating needed between 50 and 60 Hz grids.