The ABB 3AXD50000706105 is a factory-packaged AC drive with the disconnect and fuses already integrated — one order code, one box, ready to land on the panel floor. No separate breaker cabinet, no fuse holder wiring, no line reactor bracket to source. The UL light-overload rating lands at 125 Hp, 156 A on 460 V, which covers a standard 125 Hp motor in a pump or fan duty cycle without oversizing the drive. Frame size R7 means the mounting footprint and gland plate are fixed; if you're swapping an older R7 drive or building a new panel around this frame, the cutout and bus work carry over.
Input voltage is 440... 480 V three-phase — the standard North American 480 VAC industrial bus. The drive handles 50/60 Hz. NEMA Type 1 enclosure and IP21 protection keep it indoors only.
What's in the box — and what isn't
The package includes the drive, disconnect switch, input fuses, and a NEMA 1 enclosure — everything needed to terminate incoming line power and run motor leads. No external contactor or fuse block to source. The R7 frame is sized for the 156 A output; if you're replacing an existing R7 drive from another manufacturer, verify the mounting hole pattern and bus bar spacing — ABB's R7 matches the standard ABB footprint, but cross-brand swaps need a mechanical check.