The ABB 3AXD50000716647 is a drive control unit in frame size R0, designed for 3-phase 380-480 VAC input at 47-63 Hz. It delivers 1.1 kW normal-use output at 3.3 A, with heavy-duty capability rated at 0.75 kW / 2.4 A and light-overload at 1.1 kW / 3.1 A. The unit includes 2 analog inputs, 1 analog output, 4 digital inputs, and 2 digital outputs, communicating via MODBUS.
The normal-use output current of 3.3 A (1.1 kW) is the continuous rating for typical motor loads; the heavy-duty curve at 2.4 A (0.75 kW) applies when the drive must handle higher peak torque or cyclic overloads. For UL-listed installations, the normal-use output is 3.0 A (1.5 Hp) and heavy-duty is 2.1 A (1 Hp). Power factor is 0.98, and standby loss is 7 W — the unit draws 38 W under full load. Efficiency meets IE2 level. The IP20 enclosure (NEMA Open Type) is suitable for clean indoor panel mounting; the 2000 m altitude rating covers most installations without derating.
Integration notes
Mounts as a module in a control panel; frame size R0 is compact. The MODBUS interface uses the built-in hardware — no additional option card needed for basic serial communication. Ambient temperature must not exceed 40 °C; operating humidity range is 5-95% RH. The SCIP number bc3f21f6-ab11-453c-8372-42a57e38dab9 Finland is on file for EU substance compliance.