The ABB 3AXD50000750245 is an ACQ531-01-026A-4 PN drive rated for 11 kW normal-use output at 25 A, in Frame Size R2. It accepts 380-480 V three-phase input and carries IP20 protection for panel-mount installations.
The 11 kW normal-use power rating (Pn) and 25 A output current (In) define the continuous motor capacity this drive handles without overload cycling. The light-overload rating sits at 11 kW and 23.8 A — essentially the same headroom, so this unit is specced for constant-torque applications rather than high-overload duty cycles. Standby loss of 15 W is the heat the drive dissipates when powered but not driving a motor. Frame Size R2 determines the physical footprint and mounting hole pattern. If you're replacing an existing R2-frame ABB drive, the mechanical swap is direct. For a new panel layout, the R2 envelope is the dimension to design around.
Sourcing this order code against an RFQ confirms the exact firmware and hardware revision for the application.
Installation constraints
Maximum ambient temperature is 40 °C, so derate or forced ventilation is needed if the panel ambient exceeds that. Three-phase input only.