The ABB 3AXD50000814176 is a drive module in Frame R2, sized for a 7.5 kW motor at 17.0 A under normal-use (light-overload) duty on a 380-480 V three-phase supply. Heavy-duty use drops the rating to 5.5 kW / 12.6 A. The IP20 enclosure means it is intended for panel mounting. Built-in MODBUS RTU on the control board handles the fieldbus link; there is no industrial Ethernet port, so if the line uses PROFINET or EtherNet/IP, an optional fieldbus adapter will be needed. The 2 analog inputs and 1 analog output cover basic speed reference and feedback, while the 4 digital inputs and 2 digital outputs manage start/stop, fault reset, and run status. Power consumption at rated load is 224 W, with a standby loss of 12 W — relevant for panel thermal calculations. Sound level is 62 dB(A), typical for a drive of this frame size. The module includes the control unit; no separate controller board to order.
The drive carries three duty ratings. Normal use (light-overload): 7.5 kW / 17.0 A. Heavy-duty use: 5.5 kW / 12.6 A. Light-overload use is listed at 7.5 kW / 16.2 A. The UL ratings follow the same pattern: heavy-duty at 7.5 Hp / 11.0 A, light-overload at 10 Hp / 14.0 A. The IE2 efficiency level means the drive meets the standard for variable-speed drives in the EU; it is not the highest tier (IE3 or IE4), but for many industrial applications IE2 is the baseline. Power factor is 0.98, which keeps line-side reactive current low.
Mounting type is module — it bolts into a panel or onto a backplate. Frame R2 is a compact size. Ambient temperature is rated to a maximum of 40 °C, with operating humidity from 5 to 95 % non-condensing. Altitude is rated to 2000 m without derating. The NEMA enclosure type is Open Type, consistent with the IP20 degree of protection. No battery or cell is included, so no periodic battery replacement. WEEE category is 5 (Small Equipment, external dimension under 50 cm).