The ABB 3AXD50000814404 is a low-voltage AC machinery drive module, rated for 22 kW output power and 45 A output current under normal use (IEC). It's built for 3-phase 380-480 V input, 47.5-63 Hz, in an IP20 open-type enclosure — meaning it's a cabinet-mount unit, not a standalone wall-mount. Frame size R4 gives you the mechanical footprint for panel layout.
The drive carries three duty ratings that map to different application profiles. Normal use (Pn 22 kW, In 45 A) covers constant-torque loads like conveyors and pumps. Heavy-duty use (PhD 18.5 kW, IhD 38 A) is the rating for higher overload demands — think crushers or extruders where you need more torque margin. Light-overload use (PlD 22 kW, IlD 42 A) sits between them, offering the same power as normal use but with slightly lower current headroom. The IE2 efficiency class means it meets the base EU efficiency level for variable-speed drives.
This is an active-production part — no end-of-life notice. The SCIP number a7e9add0-620e-4316-8bd6-c358d91bc66b Finland is the EU Substance of Concern In Products identifier for the article, required for REACH compliance documentation. WEEE category 5 (Small Equipment) governs its end-of-life take-back obligations in EU markets. The NEMA Open Type rating means it's intended for installation within an enclosure that provides additional environmental protection.