The ABB 3AXD50000865024 is an ACQ580-01 irrigation wall-mounted single drive, UL-listed for 40 Hp light-overload use (114 A) and 30 Hp heavy-duty use (88 A) at 460 V. It runs on 3-phase 208-240 V input, 50/60 Hz, and comes in Frame Size R5 with a NEMA Type 1 enclosure (IP21).
The 88 A heavy-duty rating (30 Hp) applies for constant-torque applications like screw feeders or positive-displacement pumps where the drive must hold rated torque through the full speed range. Both ratings are UL-listed, so the drive carries a valid SCCR for North American panel builds without derating.
NEMA Type 1 (IP21) means the drive is suitable for indoor use where falling dirt and dripping water are the main concerns — typical for a pump house or irrigation control shed. No conduit knockouts are required for the enclosure; standard cable glands through the bottom gland plate work. Frame Size R5 determines the mounting footprint and the bus-bar layout for incoming power; verify the gland-plate dimensions against your existing panel cutout before drilling.
Product status is active. This is a current-production drive, not a phase-out or last-time-buy item. No official successor exists because none is needed — this is the current revision.