The ABB 3AXD50001002732 is a wall-mounted HVAC drive in an R1 frame, rated 4 kW normal-use output at 9.4 A from a 380–415 V three-phase supply. It ships with the control unit included. Heavy-duty use is rated 3 kW at 7.2 A; light-overload use is 4 kW at 8.9 A. UL light-overload ratings are 3 Hp at 6.0 A.
IP66 and NEMA Type 4X enclosure means this drive handles washdown environments, dust, and hose-directed water — common for rooftop HVAC units or food-processing air handlers. Maximum ambient temperature is 40 °C. Standby loss is 14 W, which matters for energy-code compliance on fan and pump drives that sit idle for long periods. Power factor is 0.98.
Two analog inputs and two analog outputs are available for duct static pressure sensors or valve actuators. Six digital inputs and three digital outputs handle start/stop, fault reset, and status feedback. BACnet MS/TP is the onboard protocol — no option card needed for BAS integration. There is no industrial Ethernet port on this variant, so if the spec calls for BACnet/IP or Modbus TCP, that is a different order code.
No direct pin-compatible alternative exists in the same family. If a different frame size or I/O count is needed, the order code changes.