The ABB 3AXD50001002992 is a wall-mounted drive rated 22 kW normal use at 45 A on 400 V three-phase input. Heavy-duty output is 18.5 kW at 37.7 A, per the datasheet. The IP66 enclosure with NEMA Type 4X rating suits washdown environments in water and wastewater applications. Frame size R3 and the included control unit mean the drive arrives ready for commissioning — no separate control module to order.
Light-overload use at 42.8 A sits between the two. The UL listing shows 30 Hp at 44 A on 460 V, so the drive covers both IEC and North American motor frames within the same unit. Standby loss of 16 W matters for panel thermal budgeting in sealed enclosures.
Two analog inputs and two analog outputs are available for process signals — pressure transducer or flowmeter feedback, for example. Six digital inputs and three digital outputs handle start/stop, fault reset, and status indication. Communication is CAN-based; there are no industrial Ethernet interfaces on this variant, so a fieldbus adapter or gateway is needed for PROFINET or EtherNet/IP networks.
This part carries an active lifecycle status. No last-time-buy or phase-out notice applies. The efficiency class is IE2, which meets the minimum for variable-speed drives under current EU regulations.