The ABB 3AXD50001003111 is a wall-mounted drive rated for 2.2 kW normal-use output at 5.6 A on a 380–415 V three-phase supply. It ships with the control unit included. Frame size R1 keeps the footprint compact for panel or wall mounting, and the IP66 / NEMA 4X enclosure means it can sit directly on the machine or in a washdown area without an extra cabinet. Ambient limit is 40 °C, so watch the air flow if you pack several in a row. The drive carries IE2 efficiency and a power factor of 0.98, which keeps the line-side losses low for continuous-duty applications. Standby loss sits at 14 W — not negligible if the drive stays powered but idle for long periods.
Normal-use output (Pn) is 2.2 kW at 5.6 A — that's the rating for typical constant-torque loads like conveyors or fans running within the drive's continuous current capability. Heavy-duty use (PhD) drops to 1.5 kW at 4 A, which is the headroom you need for high-starting-torque applications or overload cycles. Light-overload use (PlD) stays at 2.2 kW but at 5.3 A, slightly below the normal-use current, reflecting a different duty cycle definition. Under UL listing, the light-overload output is 3 Hp at 4.8 A — close to the IEC light-overload figure but not identical, so match the rating system your local code requires. Apparent power output is 3.9 kV·A. Frequency range is 47.5 to 63 Hz.
I/O and communication — what's on board
The control unit provides 2 analog inputs, 2 analog outputs, and 6 digital inputs plus 3 digital outputs. That's enough for basic speed reference, feedback, and start/stop logic without an expansion module. Communication is CAN-based — no onboard Industrial Ethernet, so if you need PROFINET or EtherNet/IP, plan for an optional fieldbus adapter. A CR2032 lithium coin cell (220 mAh, 3 V) backs the real-time clock and parameter storage. It's a standard cell, easy to replace during maintenance.