The ABB 3AXD50001063115 is an ACS580-01 wall-mounted LV AC general-purpose drive rated for 45 kW normal-use output at 89 A on 400 V three-phase supply. Light-overload use matches the normal-use power at 45 kW but with a slightly lower 83 A output current — useful for variable-torque pump/fan profiles where the drive runs below full load most of the cycle. Input voltage range is 380–480 V three-phase at 47.5–63 Hz, which covers standard 400 V and 480 V industrial mains without a transformer. Standby loss is 21 W — low enough that a panel can leave the drive powered without meaningful heat buildup during idle shifts. The IP55 enclosure and NEMA Type12 rating mean the drive handles washdown splashes and airborne dust in food-and-bev or woodworking environments without an additional cabinet. Mount it directly on the wall or machine frame; frame size R4 keeps the footprint manageable for a 45 kW class unit.
The drive carries 2 analog inputs and 2 analog outputs for speed reference or process feedback loops, plus 6 digital inputs and 3 digital outputs for start/stop, fault reset, and status indication. No onboard industrial Ethernet port — communication is via CAN protocol, so plan for a CANopen master or gateway if the line uses PROFINET or EtherNet/IP. The control unit is included in the package — no separate order needed for basic operation. A lithium coin cell (CR2032, 220 mAh) backs up real-time clock and parameter storage; verify replacement interval against the site's PM schedule.
SCIP number 9ca40e89-23b4-4f19-bc9a-b7c6f62cb713 Finland is on file for SVHC reporting. Altitude rating is 4000 m — no derating needed for most high-altitude installations, though the IP55 seal may need a check above 3000 m if the site sees rapid pressure changes.