The ABB 3AXD50001109301 is an ACS580-01 industrial wall-mounted single drive rated 1.1 kW normal-use output (Pn) at 3.3 A (In) on a 380–415 V 3-phase supply — sized for a standard 1.1 kW induction motor on a pump, fan, or conveyor. Heavy-duty use (PhD) derates to 0.8 kW / 2.6 A (IhD) for constant-torque loads like a screw conveyor or extruder. Light-overload use (PlD) holds at 1.1 kW / 3.1 A (IlD), with a UL listing of 1.5 Hp / 3.0 A at 500 V. The drive includes the control unit and communicates over CAN, so it integrates into an existing CANopen or CAN-based machine network without a separate gateway module. Two analog inputs and two analog outputs handle speed reference and actual-value feedback; six digital inputs and three digital outputs cover start/stop, fault reset, and status signaling. Power factor is 0.98 — near-unity, which means minimal reactive current draw and no need for external power-factor correction on the line side. Standby loss is 14 W, so the drive idles efficiently in applications where the motor runs intermittently.
Enclosure and mounting — outdoor and washdown ready
IP66 and NEMA Type4X mean the drive withstands hose-directed water, dust ingress, and corrosion — suitable for food-and-beverage washdown, wastewater treatment, or outdoor installation without a separate cabinet. Wall-mounted with a maximum ambient of 40 °C; above that, derate output per the thermal curve in the manual. The lithium coin cell (CR2032, 220 mAh, 3 V) backs the real-time clock and parameter storage — expect 5–7 years of life in a powered-off state.