This ABB ACS580-01 wall-mounted drive (order code 3AXD50001109325) is rated 2.2 kW normal-use output at 5.6 A on a 380-415 V three-phase supply, with a heavy-duty rating of 1.5 kW at 4 A. The IP66 / NEMA 4X enclosure means it handles washdown environments — food, beverage, or outdoor installations — without an extra cabinet. Efficiency is IE2, standby loss is 14 W, and the unit includes the control unit, so no separate controller purchase is needed for basic operation.
The 5.6 A normal-use current (In) is the continuous rating for a standard 2.2 kW motor at 400 V. If your application cycles hard or runs a constant-torque load like a conveyor, the heavy-duty 4 A / 1.5 kW rating is the one to size by — it accounts for higher thermal stress. The UL light-overload rating of 3 Hp at 4.8 A (500 V) covers North American motor frames. Input frequency tolerance of 47.5-63 Hz lets it work on 50 Hz or 60 Hz grids without derating. The 6 digital inputs and 3 digital outputs cover basic start/stop, speed reference, and fault reset without an extra I/O module.
Integration notes
Wall-mounted, so plan for backplate clearance and cable entry from the bottom. The IP66 / NEMA 4X rating means the enclosure seals against hose-down, but verify the conduit hubs are also rated for wet locations. Communication is CAN-based; if your network is Ethernet, you will need a fieldbus adapter module (not included). The CR2032 lithium coin cell backs the real-time clock and parameter storage — it is a service item, not a lifetime part, so note the replacement interval in your PM schedule.