The ABB 3AXD50001109585 is a wall-mounted LV AC drive, IEC-rated 11 kW normal duty at 25 A on 400 V three-phase, with a heavy-duty rating of 7.5 kW at 17 A. It is built for water and wastewater applications, carrying an IP66 / NEMA 4X enclosure that handles washdown environments directly.
The normal-duty current of 25 A (In) is the continuous rating for pump and fan profiles; the light-overload rating of 23.8 A (IlD) at 11 kW matches the same power but with a slightly lower current headroom. Heavy-duty use at 17 A (IhD) covers constant-torque loads like screw pumps or conveyors. The UL listing shows 15 Hp at 23 A on 460 V, so the drive fits both IEC and North American motor frames without derating. Power factor is 0.98, which means the drive presents near-unity power factor to the line — good for installations where utility penalties apply. Standby loss sits at 15 W, low enough to leave the drive powered continuously in a panel without significant heat buildup. Communication is CAN-based; there are no onboard industrial Ethernet ports. If you need PROFINET or EtherNet/IP, plan for an external gateway or option module.
IP66 / NEMA 4X means the drive is dust-tight and hose-down rated — suitable for outdoor installation or washdown zones in water treatment, food processing, or marine applications. Maximum ambient temperature is 40 °C; above that, derate the output current. Wall-mounted, so it saves floor space but needs clearance around the enclosure for airflow. The control unit is included, so no separate order for the keypad or logic board. The drive has 2 analog inputs and 2 analog outputs, plus 6 digital inputs and 3 digital outputs — enough for a basic pump control loop with feedback and a few status signals. A CR2032 lithium coin cell (220 mAh, 3 V) backs up the real-time clock and parameter memory.