The 3AXD50001109592 is an ABB ACQ580-01 wall-mounted drive rated 15 kW normal-duty output at 32 A on a 400 V 3-phase supply, with a heavy-duty rating of 11 kW at 24.6 A. The enclosure carries IP66 and NEMA 4X protection, so it handles washdown environments and outdoor installation without an additional cabinet. Standby loss sits at 16 W, and the input frequency range covers 47.5 to 63 Hz, making it usable on 50 or 60 Hz mains within tolerance.
Normal-duty output current of 32 A sizes branch protection and cabling for continuous motor load. Heavy-duty use drops to 24.6 A for constant-torque applications. Power factor is 0.98, which means the drive draws near-sinusoidal current from the line with minimal reactive component — no power-factor correction caps needed upstream. The IE2 efficiency level is the baseline for the drive itself, not the motor; expect conversion losses consistent with that class.
The drive includes 2 analog inputs and 2 analog outputs, plus 6 digital inputs and 3 digital outputs. That is enough for a basic pump or fan control loop with feedback and start/stop logic. Communication is via CAN protocol; there are no industrial Ethernet interfaces on this variant, so plan for a gateway if the control network is PROFINET or EtherNet/IP. The control unit is included in the package. A lithium coin cell (CR2032, 220 mAh) backs the real-time clock and parameter storage; it is field-replaceable.