Skip to main content
Schneider Electric A9C22515

Schneider Electric Acti9 iCT A9C22515 Contactor, 2P, 220 VAC

MPN A9C22515
Active

Schneider Electric Acti9 iCT contactor, A9C22515, 2P, 220 V AC 50 Hz coil, 16 A AC-7A / 6 A AC-7B, clip-on 35 mm DIN rail.

$82.41 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C22515 key specifications
ParameterValue
Control typeRemote control
Control signal typeMaintained
Main product or component typeContactor
Voltage250 V AC 50 Hz
Coil voltage220 V AC 50 Hz
Insulation voltage ui500 V AC 50/60 Hz
Current16 A AC-7 A 6 A AC-7B
Frequency100 switching operations/day
Poles2P
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C

All specifications

A9C22515 additional specifications
ParameterValue
Temp operating min-5 °C
Storage temperature-40...70 °C
Pollution degree2
ColorWhite
Depth68.5 mm
Width18 mm
Height81 mm
Mechanical life cycles1000000 cycles
ApplicationMotor-heating-lighting
Operating temperature-5...60 °C

Product details

The A9C22515 is a Schneider Electric Acti9 iCT contactor — a 2-pole, 220 V AC 50 Hz coil unit rated for 16 A in AC-7A duty (resistive/motor-heating-lighting loads) and 6 A in AC-7B (motor loads).

Rated operational voltage is 250 V AC, insulation voltage 500 V AC, so it handles single-phase line voltage with headroom on the insulation side. Electrical durability is 100,000 cycles at 16 A AC-7A, and 30,000 cycles at 6 A AC-7B or AC-3 — enough for daily switching in a lighting or heating schedule, but not for a high-cycle machine. Mechanical durability is 1,000,000 cycles, so the mechanism outlasts the electrical contacts under rated load. The coil draws 15 VA inrush, 1.3 W holding at 250 V AC — a standard PLC or relay output can drive it, but check the maintained control signal requirement (not momentary).

The IP20 body is fine for enclosed panels; the modular enclosure also carries an IP40 rating, so it's suitable for surface-mount enclosures in dry indoor locations. Tunnel-type terminals accept up to 6 mm² rigid on the power side and 2.5 mm² on the control side — torque both circuits to 0.8 N·m.

MPN
A9C22515