Skip to main content
Schneider Electric A9C62240

Schneider Electric A9C62240 Reflex iC60N, 40 A, 2P, C Curve,

MPN A9C62240
Active

Schneider Electric Acti9 Reflex iC60N, integrated control MCB, 40 A, 2P, curve C, 20 kA Icu at 240 V AC, DIN-rail mount.

$249.66 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C62240 specifications
ParameterValue
Trip unit typeThermal-magnetic
Main product or component typeIntegrated control circuit breaker
Coil voltage230 V AC 50/60 Hz 24 V AC 50/60 Hz 48 V AC 50/60 Hz 24 V DC 48 V DC
Insulation voltage ui500 V AC
Breaking capacity20 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 10 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2
IP ratingIP20
Pollution degree3
ColorWhite
Depth77 mm
Width81 mm
Height84 mm
Electrical life cyclesAC-1: 50000 cycles AC 50 Hz
Mechanical life cycles50000 cycles
ApplicationDistribution Control

Product details

The Schneider Electric A9C62240 is a Reflex iC60N integrated control circuit breaker from the Acti9 range, combining overcurrent protection with remote switching capability in a single 2-pole device rated at 40 A with a C curve. Rated 20 kA Icu at 220–240 V AC and 10 kA Icu at 380–415 V AC per EN/IEC 60947-2, so it handles substantial fault currents typical in commercial distribution panels while protecting downstream circuits.

Control and integration

Control circuit voltage options include 230 V AC, 24 V AC, 48 V AC, 24 V DC, and 48 V DC, giving flexibility for both mains-referenced and low-voltage control schemes. Supports toggle remote control by pulse ON/OFF button or by continuous command, as well as maintained or impulse control signals, so it can be wired into a PLC digital output or a manual pushbutton station. Local signalling via red and green LEDs indicates fault, device ON, overheat, tripped, and ready states, which helps during commissioning and troubleshooting without needing a separate indicator.

MPN
A9C62240