The Schneider Electric A9C62240 is a Reflex iC60N integrated control circuit breaker from the Acti9 range, combining overcurrent protection with remote switching capability in a single 2-pole device rated at 40 A with a C curve. Rated 20 kA Icu at 220–240 V AC and 10 kA Icu at 380–415 V AC per EN/IEC 60947-2, so it handles substantial fault currents typical in commercial distribution panels while protecting downstream circuits.
Control and integration
Control circuit voltage options include 230 V AC, 24 V AC, 48 V AC, 24 V DC, and 48 V DC, giving flexibility for both mains-referenced and low-voltage control schemes. Supports toggle remote control by pulse ON/OFF button or by continuous command, as well as maintained or impulse control signals, so it can be wired into a PLC digital output or a manual pushbutton station. Local signalling via red and green LEDs indicates fault, device ON, overheat, tripped, and ready states, which helps during commissioning and troubleshooting without needing a separate indicator.