Skip to main content
Schneider Electric A9K23601

Schneider Electric A9K23601 Acti9 iK60 MCB, 1A Curve B, 1P+N

MPN A9K23601
Obsolete

Schneider Electric Acti9 iK60 miniature circuit-breaker, A9K23601, 1P+N, 1 A rated, B-curve, 6 kA breaking capacity at 230 V AC, thermal-magnetic trip, clip-on DIN rail mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9K23601 key specifications
ParameterValue
Control typeToggle
Trip unit typeThermal-magnetic
Main product or component typeMiniature circuit-breaker
Insulation voltage ui440 V AC 50/60 Hz conforming to EN/IEC 60898-1
Breaking capacity6000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1
IP ratingIP20
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C
Pollution degree2 conforming to EN/IEC 60898-1

All specifications

A9K23601 additional specifications
ParameterValue
ColorWhite
Depth78.5 mm
Width36 mm
Height85 mm
Electrical life cycles10000 cycles
Mechanical life cycles20000 cycles
ApplicationDistribution
Operating temperature-25...60 °C

Product details

The Schneider Electric A9K23601 is a 1P+N miniature circuit-breaker from the Acti9 iK60 series, rated 1 A at 30 °C with a B-curve (magnetic trip between 3 and 5 x In).

The 1 A rating and B-curve mean it trips fast on moderate overloads (3–5 x In), so it suits resistive loads like lighting strings or control transformers where inrush is low. Thermal-magnetic trip technology handles both sustained overload (thermal bimetal) and short-circuit (solenoid). It is also certified for isolation (EN/IEC 60898-1), meaning you can safely isolate the downstream circuit with the toggle in the OFF position. The 1P+N configuration switches the phase and switches the neutral (neutral left). Only the phase is protected — the neutral is switched but not monitored for overcurrent.

IP20 finger-safe protection on the front; the terminals are protected when wired.

MPN
A9K23601