Skip to main content
Schneider Electric A9L16447

Schneider Electric A9L16447 Acti9 iPRD Surge Arrester, 3P, 4

MPN A9L16447
Obsolete

Schneider Electric Acti9 iPRD, Type 2 surge arrester, 3 poles, 340 V Uc, 20 kA Imax, 400 V AC, clip-on DIN rail, white (RAL 9003).

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9L16447 specifications
ParameterValue
Voltage400 V AC (+/- 10 %) at 50/60 Hz
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C
ColorWhite (RAL 9003)
Depth69 mm
Width54 mm
Height81 mm
ApplicationDistribution
Operating temperature-25...60 °C

Product details

The Schneider Electric A9L16447 is a Type 2 surge arrester from the Acti9 iPRD range, designed for electrical distribution networks. It uses MOV technology to clamp transient overvoltages on a 3-phase TN-C earthing system, with a maximum continuous operating voltage of 340 V L/PE and a protection level below 1.1 kV. Rated operational voltage is 400 V AC (+/- 10 %) at 50/60 Hz, and it handles a maximum discharge current of 20 kA common mode (L/PE). The nominal discharge current is 5 kA (L/PE) and 5 kA (N/PE). The unit is a 3-pole (3P) device with pluggable cartridges, tunnel-type terminals accepting 2.5 to 35 mm² conductors, and a tightening torque of 2.5 N.m. The enclosure is white (RAL 9003) and carries an IK03 impact rating per IEC 62262.

The part complies with EN 61643-11 and IEC 61643-11, and carries quality labels NF, OVE, and KEMA-KEUR. These certifications remain valid for installed units but do not affect the procurement path for new supply.

Mounts via clip-on (DIN rail) in the standard 35 mm profile. The 54 mm width (6 x 9 mm pitches) and 69 mm depth fit within a standard distribution board or sub-panel. The manufacturer specifies an associated circuit breaker for series protection — options include the IC60N, iC60H, or iC60L, all 25 A curve C, with interrupting capacities of 10 kA, 15 kA, and 25 kA respectively. This breaker must be wired upstream to limit fault current and allow safe cartridge replacement. Operating temperature range is -25 to 60 °C, storage from -40 to 85 °C, with relative humidity 5 to 90 %. Maximum operating altitude is 2000 m. No remote signalling contacts are fitted on this variant — fault indication is local only.

MPN
A9L16447