Skip to main content
Schneider Electric A9L2F340

Schneider Electric A9L2F340 Acti9 iPRD Type 2+3 Surge Arrest

MPN A9L2F340
Active

Schneider Electric Acti9 iPRD, Type 2+3 surge arrester, 3P, 40 kA max discharge, 25 kA SCCR, clip-on DIN rail, IP20, white RAL 9003.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9L2F340 specifications
ParameterValue
Voltage230/400 V AC at 50/60 Hz
Response time< 25 ns
ColorWhite (RAL 9003)
Depth70 mm
Width54 mm
Height105 mm
MaterialThermoplastic
ApplicationDistribution
Operating temperature-40...85 °C

Product details

The Schneider Electric A9L2F340 is an Acti9 iPRD Type 2 + 3 surge arrester with pluggable MOV cartridges, rated for 230/400 V AC 50/60 Hz TN-C earthing systems. It clips onto a DIN rail and occupies 6 modules of 9 mm pitch — 54 mm wide, 105 mm tall, 70 mm deep. The white (RAL 9003) thermoplastic housing carries an IP20 rating with cartridges fitted and wired, and an IK05 impact rating. The key ratings that decide fit: 40 kA maximum discharge current (Imax) and 20 kA nominal discharge current (In) per IEC 61643-11. Response time is under 25 ns, and the integrated fuse (condition of use) eliminates the need for an external back-up fuse on the load side, saving a DIN slot. Temporary overvoltage (TOV) withstand is 442 V L/N for 120 minutes in safe failure mode, and 337 V N/PE for 5 seconds — the part fails safe rather than catastrophically under sustained overvoltage.

Power terminals accept 2.5–35 mm² solid/stranded or 2.5–25 mm² flexible cable; earthing terminal accepts 6–35 mm² solid/stranded or 6–25 mm² flexible. Strip length is 18 mm for both power and earthing terminals, 10 mm for the remote control signal. Tightening torque on the power circuit is 4.5 N·m. Remote signalling is included: a volt-free changeover contact rated 1 A at 250 V AC or 0.5 A at 24–48 V DC. The local status flag shows green for operating, red for fault — no need to open the panel to check cartridge health.

MPN
A9L2F340