Skip to main content
Schneider Electric A9N18353

Schneider Electric A9N18353 Acti9 C120N MCB, 80 A 4P B-Curve

MPN A9N18353
Active

Schneider Electric Acti9 C120N, miniature circuit-breaker A9N18353, 80 A rated, 4P, B-curve, 10 kA Icn at 400 V AC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9N18353 key specifications
ParameterValue
Control typeToggle
Trip unit typeThermal-magnetic
Main product or component typeMiniature circuit-breaker
Voltage380...415 V AC 50/60 Hz 220...240 V AC 50/60 Hz 440 V AC 50/60 Hz 230...400 V AC 50/60 Hz
Insulation voltage ui500 V AC 50/60 Hz conforming to EN/IEC 60947-2
IP ratingIP20
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-25 °C
Storage temperature-40...85 °C
Pollution degree3 conforming to IEC 60947-2

All specifications

A9N18353 additional specifications
ParameterValue
ColorWhite
Depth73 mm
Width108 mm
Height81 mm
Electrical life cycles5000 cycles conforming to IEC 60947-2
Mechanical life cycles20000 cycles
ApplicationDistribution
Operating temperature-25...70 °C

Product details

The Schneider Electric A9N18353 is a 4-pole miniature circuit-breaker from the Acti9 C120N series, rated 80 A at 30 °C with a B-curve trip characteristic (magnetic tripping between 3 and 5 times In). It is a thermal-magnetic device, meaning the bimetal handles overloads and the solenoid handles short-circuits — no electronics to drift or fail in high ambient heat. The 10 kA Icn at 400 V AC (per EN/IEC 60898-1) and up to 20 kA Icu at 240 V AC (per EN/IEC 60947-2) tell you it can clear a fault without welding contacts or venting arc gas into the panel, which matters when you are coordinating downstream breakers in a distribution board.

Clip-on mounting on a 35 mm symmetrical DIN rail, 12 module pitches wide (108 mm). Tunnel terminals accept up to 50 mm² rigid or 35 mm² flexible cable; stripping length is 15 mm, torque to 3.5 N·m.

Dual-certified to EN/IEC 60947-2 (industrial) and EN/IEC 60898-1 (household/commercial). Suitability for isolation is confirmed (IEC 60947-2). Lifecycle status is current production.

MPN
A9N18353