Skip to main content
Schneider Electric A9Q26225

Schneider Electric A9Q26225 Acti9 Vigi iC60, 2P, 25 A, 500 m

MPN A9Q26225
Obsolete

Schneider Electric Acti9 Vigi iC60, add-on residual current device, 2P, 25 A, Type A, 500 mA, instantaneous, 230...415 V AC, clip-on DIN rail.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9Q26225 specifications
ParameterValue
Main product or component typeAdd-on residual current device
Voltage230...415 V AC 50/60 Hz conforming to EN/IEC 61009-1 230...415 V AC 50/60 Hz conforming to EN/IEC 61009-2-1
Insulation voltage ui500 V AC 50/60 Hz conforming to IEC 60947-2
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C
Pollution degree3 conforming to IEC 60947-2
Depth73.5 mm
Width27 mm
Height91 mm
Operating temperature-25...60 °C

Product details

The Schneider Electric A9Q26225 is an Acti9 Vigi iC60 add-on residual current device (RCD) rated 25 A, 2-pole, Type A, with 500 mA sensitivity and instantaneous trip. It clips onto the right side of an Acti9 iC60 MCB via the plug-in connection, turning a standard branch breaker into a combined RCBO assembly — no extra wiring between the two units. The 27 mm width matches a single modular pitch on DIN rail, so it occupies one slot in the panel.

The 500 mA earth-leakage sensitivity suits equipment or fire protection on outgoing circuits. Type A detection catches pulsating DC fault currents. Voltage-independent tripping operates even if line voltage is lost. Insulation voltage is 500 V AC, and impulse withstand is 6 kV — enough for standard distribution environments.

Mounts via clip-on to DIN rail; the plug-in connection to the adjacent iC60 MCB handles the electrical link — no jumper wires needed. The bottom comb busbar is compatible, so you can feed a row of these from a common bus without individual ring terminals. IP20 on the body, IP40 inside a modular enclosure — standard for dry indoor panels.

MPN
A9Q26225