Skip to main content
Schneider Electric A9V16425

Schneider Electric A9V16425 Vigi iC60, 4P 25A 500mA AC Type

MPN A9V16425
Obsolete

Schneider Electric Acti9 Vigi iC60 add-on residual current device, 4P, 25 A, 500 mA, AC type, 73.5 mm depth, 54 mm width, 91 mm height.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9V16425 specifications
ParameterValue
Main product or component typeAdd-on residual current device
Voltage230...415 V AC 50/60 Hz conforming to EN/IEC 61009-1 230...415 V AC 50/60 Hz conforming to EN/IEC 61009-2-1
Insulation voltage ui500 V AC 50/60 Hz conforming to IEC 60947-2
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-5 °C
Storage temperature-40...85 °C
Pollution degree3 conforming to IEC 60947-2
Depth73.5 mm
Width54 mm
Height91 mm
Operating temperature-5...60 °C

Product details

The Schneider Electric A9V16425 is an Acti9 Vigi iC60 add-on residual current device (RCD) — a voltage-independent, Type AC earth-leakage module rated for 25 A at 230...415 V AC, 50/60 Hz, with a 500 mA sensitivity. It clips onto the outgoing side of a compatible iC60 MCB on a DIN rail, adding earth-leakage protection to the circuit. The 4P (four-pole) variant covers three-phase plus neutral networks. The earth-leakage protection is instantaneous (no intentional time delay), and the tripping technology is voltage independent — it will trip on residual current even if the mains voltage is lost, a critical safety feature for personnel protection.

Mounts via clip-on to a DIN rail. The 4P module occupies 6 x 9 mm pitches (54 mm width). Bottom tunnel-type terminals accept 1...25 mm² rigid or 1...16 mm² flexible conductors; strip length is 14 mm. A comb busbar is compatible on the bottom side for distribution. IP20 rated (finger-safe) on the body; IP40 when enclosed in a modular enclosure. The trip indicator provides local visual status of the RCD state.

Electromagnetic compatibility is verified with an 8/20 µs impulse withstand of 250 A per IEC 61009-1. The device is intended as an outgoer (load-side) protection element in a distribution board.

MPN
A9V16425