Skip to main content
Schneider Electric A9V29463

Schneider Electric A9V29463 Acti9 Vigi iC60, 4P, 63 A, Type

MPN A9V29463
Obsolete

Schneider Electric Acti9 Vigi iC60, add-on residual current device, 4P, 63 A, Type A, selective 1000 mA, 230...415 V AC, clip-on DIN rail.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9V29463 specifications
ParameterValue
Main product or component typeAdd-on residual current device
Voltage230...415 V AC 50/60 Hz conforming to EN/IEC 61009-1 230...415 V AC 50/60 Hz conforming to EN/IEC 61009-2-1
Insulation voltage ui500 V AC 50/60 Hz conforming to IEC 60947-2
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C
Pollution degree3 conforming to IEC 60947-2
Depth73.5 mm
Width135 mm
Height91 mm
Operating temperature-25...60 °C

Product details

The A9V29463 is a 4-pole add-on residual current device from the Acti9 Vigi iC60 range, rated 63 A with a 1000 mA Type A earth-leakage sensitivity. It clips onto the outgoing side of a compatible Acti9 iC60 MCB via screw connection, making it a modular RCD add-on rather than a standalone unit.

The 1000 mA sensitivity is deliberately high (standard socket circuits use 30 mA); this is for protection against fire risk from persistent earth faults on distribution circuits, not for personal shock protection. Type A detection covers sinusoidal AC and pulsating DC residual currents, which covers most modern electronic loads (VFDs, switched-mode supplies) that generate pulsed leakage. The selective (S-type) time delay means it coordinates with downstream 30 mA RCDs — the downstream device trips first, avoiding a whole-panel blackout for a single fault. The 6 kV impulse withstand voltage (Uimp) and 8/20 µs 3000 A impulse current withstand confirm it survives surge events on the line side without nuisance tripping or damage.

Clip-on mounting to DIN rail, 7 x 9 mm pitches wide (135 mm). The tunnel-type terminals on the bottom accept 1...35 mm² rigid or 1...25 mm² flexible cable, with a stripping length of 14 mm and tightening torque of 3.5 N·m. The bottom connection also accepts comb busbars, so you can feed multiple RCDs from a common bus without individual ring terminals. IP20 on the body, IP40 inside a modular enclosure — standard for panel installation, not for wet locations.

MPN
A9V29463