Skip to main content
Schneider Electric A9XPH816

Schneider Electric A9XPH816 Acti9 Comb Busbar, 80 A, 288 mm,

MPN A9XPH816
Obsolete

Schneider Electric Acti9 comb busbar, bottom feed, 3L+N, 18 mm pitch, 16 modules, 80 A at 40 °C, 288 mm width, white (RAL 9003).

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9XPH816 specifications
ParameterValue
Connector typeTooth
Main product or component typeComb busbar
Voltage230 V AC Ph/N 400 V AC Ph/Ph
Insulation voltage ui500 V AC conforming to IEC 61439-1
Current80 A at 40 °C
Terminal pitch18 mm
Pollution degree3 conforming to IEC 60947-7-1
ColorWhite (RAL 9003)
Width288 mm

Product details

It's rated 80 A at 40 °C, with a 500 V AC rated insulation voltage and operational voltage of 230 V AC phase-to-neutral or 400 V AC phase-to-phase. The 288 mm width spans 16 modules at an 18 mm pitch, making it a direct fit for Acti9 distribution boards where you need to distribute 3L+N from the bottom.

The busbar mounts horizontally on tunnel-type terminals at the bottom of the enclosure. It provides 1 incoming way (4-pole, N + 3L) and 6 outgoing ways (each 1P+N). The connection pitch is 18 mm, with 32 nine-millimeter pitches total. The marking is clearly printed: outgoer side reads N N L2 N L3, incomer side reads N L2 L3. IP20 protection is achieved with end-pieces and tooth covers fitted.

It meets IEC 60947-7-1 (busbar trunking) and IEC 61439-1 (low-voltage switchgear assemblies). The rated impulse withstand voltage is 6 kV, pollution degree 3 per IEC 60947-7-1, and the fire resistance is 960 °C for 30 seconds per IEC 60695-2-1. The bar is cuttable, so you can trim it to fit shorter runs in the panel.

MPN
A9XPH816