It's rated 80 A at 40 °C, with a 500 V AC rated insulation voltage and operational voltage of 230 V AC phase-to-neutral or 400 V AC phase-to-phase. The 288 mm width spans 16 modules at an 18 mm pitch, making it a direct fit for Acti9 distribution boards where you need to distribute 3L+N from the bottom.
The busbar mounts horizontally on tunnel-type terminals at the bottom of the enclosure. It provides 1 incoming way (4-pole, N + 3L) and 6 outgoing ways (each 1P+N). The connection pitch is 18 mm, with 32 nine-millimeter pitches total. The marking is clearly printed: outgoer side reads N N L2 N L3, incomer side reads N L2 L3. IP20 protection is achieved with end-pieces and tooth covers fitted.
It meets IEC 60947-7-1 (busbar trunking) and IEC 61439-1 (low-voltage switchgear assemblies). The rated impulse withstand voltage is 6 kV, pollution degree 3 per IEC 60947-7-1, and the fire resistance is 960 °C for 30 seconds per IEC 60695-2-1. The bar is cuttable, so you can trim it to fit shorter runs in the panel.