Skip to main content
Schneider Electric ATV1200A11906060

Schneider ATV1200A11906060 AC Drive (VFD) 480V, 995 kW, 3 kV

MPN ATV1200A11906060
Active

Schneider Electric Altivar 1200 ATV1200A11906060 medium-voltage AC drive, 995 kW, 2970-3630 V input, 30-pulse rectifier, floor-standing enclosure, CE.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A11906060 specifications
ParameterValue
Input type30 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current135 A
IP ratingIP42 / IP31 / IP41
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1400 mm (standard efficiency) 1600 mm (high efficiency)
Width3960 mm (high efficiency) 3660 mm (standard efficiency)
Height2520 mm standard efficiency 2670 mm high efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

Medium-voltage drive for 995 kW motors

The ATV1200A11906060: This drive accepts a 2970-3630 V supply and delivers up to 995 kW to asynchronous or synchronous motors, with an apparent power rating of 1190 kVA. The 30-pulse diode rectifier front end keeps line-side harmonics low enough to meet IEEE 519 in most installations without add-on filters. Overload capability is defined by two profiles: standard overload handles 1.2 In for 60 s and 1.5 In for 3 s; high overload extends to 1.5 In for 60 s and 1.85 In for 3 s. This lets the drive match either constant-torque or variable-torque load demands without oversizing the power cells.

Floor-standing footprint with separate air flows

The drive ships in a floor-standing enclosure with dedicated air paths for the power section and control compartment. Standard-efficiency configuration measures 3660 mm wide × 1400 mm deep × 2520 mm high; the high-efficiency variant is wider (3960 mm) and taller (2670 mm) with a 1600 mm depth. Forced convection cooling moves 16500-19800 m³/h of air, so the installation site must provide adequate room for intake and exhaust clearance.

I/O complement and control supply

The drive includes 4 software-configurable analogue inputs (0-20 mA / 4-20 mA, 250 Ohm impedance), 2 analogue outputs of the same type, and 6 discrete inputs (expandable to 10). Control power requires an external 220 V AC supply at 3 kVA; the cooling fans draw from a separate 380 V AC source. Electrical isolation between power and control circuits is standard.

CE compliance and standards coverage

The ATV1200A11906060 carries CE marking and complies with EN/IEC 61800-3 (EMC), EN/IEC 61800-4 (adjustable speed drives), EN/IEC 61800-5-1 (safety), EN/IEC 60204-11 (machinery), and EN/IEC 60529 (enclosure protection). Dielectric strength between earth and power terminals is 20 kV AC.

MPN
ATV1200A11906060