Skip to main content
Schneider Electric ATV1200A16003333

Schneider Electric ATV1200A16003333 AC Drive (VFD) 480V

MPN ATV1200A16003333
Active

Schneider Electric Altivar 1200 ATV1200A16003333 AC drive (VFD), 1338 kW motor power, 1600 kVA, 2970-3630 V supply, 18-pulse rectifier, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A16003333 specifications
ParameterValue
Input type18 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current280 A
IP ratingIP42 / IP31 / IP41
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1600 mm (high efficiency) 1500 mm (standard efficiency)
Width3560 mm (standard efficiency) 3860 mm (high efficiency)
Height2820 mm standard efficiency 2820 mm high efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

What this medium-voltage drive powers

The ATV1200A16003333 is a medium-voltage Altivar 1200 drive rated for 1338 kW motor power at 1600 kVA apparent power, fed from a 2970...3630 V supply through an 18-pulse diode rectifier bridge. That 18-pulse front end cuts line-side harmonics below IEEE 519 thresholds without an external filter — one less cabinet to spec and wire. It drives both synchronous and asynchronous motors, with a speed range of 20...100% and overload profiles of 1.2 In for 60 s (standard) or 1.5 In for 60 s (high overload). The 1.5 In high-overload profile matters for applications like crushers or extruders that need short torque bursts without oversizing the drive.

Floor-standing enclosure and site prep

This drive ships in a floor-standing enclosure with separate air flows for the transformer and power cells — that separation keeps the transformer heat out of the electronics compartment. Standard-efficiency configuration measures 3560 mm wide x 2820 mm high x 1500 mm deep; the high-efficiency variant widens to 3860 mm and deepens to 1600 mm. Forced convection cooling moves 29900 m³/h (standard) or 33200 m³/h (high efficiency) of air — that volume dictates the room HVAC capacity, not just a vent grille. Noise level is 80 dB, so ear protection zones around the drive are expected. Power connection uses bar terminals with M10 screws, accepting 6 x 40 mm² cable per phase, entry from bottom or top. The control supply needs an external 220 V AC source at 3 kVA; the cooling fan runs off 380 V AC internal supply.

Protection, isolation, and compliance package

Dielectric strength is 10 kV AC between earth and power terminals — that test voltage confirms the insulation coordination for a 3.3 kV class drive. Ground fault protection is built into the drive, and the prospective short-circuit current rating is 31.5 kA for 150 ms. Electrical isolation between power and control circuits is standard. The integrated EMC filter covers conducted emissions per EN/IEC 61800-3 without an add-on box. CE marked, with compliance to EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-4, and EN/IEC 61800-5-1. Operating altitude is 1000...2000 m with 0.6% current derating per 100 m above 1000 m.

I/O complement and control wiring

The drive carries 4 software-configurable analogue inputs accepting 0...20 mA or 4...20 mA at 24 V max, 250 Ohm impedance, plus 2 analogue outputs of the same type. Discrete inputs number 6 standard, expandable to 10 with an option card. Internal architecture includes a phase-shifting transformer, 9 power cells, medium-voltage arrestors, cooling fans, and a human-machine interface — all factory-integrated in the enclosure. The 18-pulse rectifier and multi-cell topology mean the drive presents a near-sinusoidal current draw to the line and a clean voltage waveform to the motor.

MPN
ATV1200A16003333