Skip to main content
Schneider Electric ATV1200A26706363

Schneider Electric ATV1200A26706363 Altivar 1200, 2006 kW

MPN ATV1200A26706363
Active

Schneider Electric Altivar 1200 series, ATV1200A26706363 medium-voltage variable speed drive, 2006 kW motor power, 2970-3630 V supply, 36-pulse diode rectifier, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A26706363 specifications
ParameterValue
Input type36 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current220 A
IP ratingIP31 / IP42 / IP41
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1700 mm (high efficiency) 1700 mm (standard efficiency)
Width5170 mm (standard efficiency) 5470 mm (high efficiency)
Height2670 mm high efficiency 2670 mm standard efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

Floor-standing MV drive, 2006 kW, 36-pulse input

The ATV1200A26706363 is a Schneider Electric Altivar 1200 medium-voltage variable speed drive rated for 2006 kW motor power with a supply voltage range of 2970 to 3630 V. It uses a 36-pulse diode rectifier bridge on the input side, which significantly reduces line-side harmonics compared to 6- or 12-pulse topologies — a key advantage when connecting to weak grids or meeting IEEE 519 compliance without external filters. The drive is assembled in a floor-standing enclosure with separate air flows for power and control sections, and forced convection cooling moves 23,100 m³/h of air through the cabinet.

Physical footprint and installation constraints

The enclosure measures 2670 mm high by 5170 mm wide (standard efficiency) or 5470 mm wide (high efficiency), with a uniform depth of 1700 mm for both variants. Power cable entry is via M10 bar-type terminals accepting up to 6 x 40 mm² conductors per phase, with entry from the bottom or top of the cabinet.

Overload capability and protection

The drive offers two overload profiles: standard overload withstands 1.2× In for 60 s or 1.5× In for 3 s; high overload profile handles 1.5× In for 60 s or 1.85× In for 3 s. Ground fault protection is integrated at the drive level, and the prospective line short-circuit current rating is 31.5 kA for 150 ms. Dielectric strength between earth and power terminals is 20 kV AC, with overvoltage category II per EN/IEC 61800-5-1 and pollution degree 2.

Control interfaces and I/O complement

Four software-configurable analogue inputs accept 0-20 mA or 4-20 mA signals at 24 V max with 250 Ω impedance; two analogue outputs of the same type are available. Six discrete inputs are standard, expandable to ten with an optional module. Control power requires an external 220 V AC supply at 3 kVA; the cooling fan runs from a separate 380 V AC supply, with optional external supplies for both.

Standards compliance and lifecycle status

The drive carries CE marking and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1.

MPN
ATV1200A26706363