Skip to main content
Schneider Electric ATV212HD11N4

Schneider ATV212HD11N4 AC Drive, 11 kW, 3-phase, 480 V

MPN ATV212HD11N4
Active

Schneider Electric Altivar 212 ATV212HD11N4 AC drive, 11 kW, 3-phase 380-480 V, IP20, integrated class C2 EMC filter, 6.7 x 7.09 x 9.1 in.

$605.00 – $1,811.07 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV212HD11N4 key specifications
ParameterValue
Connector type1 open style 1 RJ45
Motor starter typeVariable speed drive
Main product or component typeVariable speed drive
Voltage= 1 mOhm 500 V DC for 1 minute
Current16.8 A 480 V 21.1 A 380 V
Frequency50...60 Hz - 5...5 %
Phases3-phase
IP ratingIP21
Temp storage max70 °C
Temp storage min-25 °C
Temp operating max40 °C
Temp operating min-10 °C

All specifications

ATV212HD11N4 additional specifications
ParameterValue
Storage temperature-13...158 °F (-25...70 °C)
Pollution degreePollution degree 2
Depth6.7 in (170 mm)
Width7.09 in (180 mm)
Height9.1 in (232 mm)
Data format8 bits, 1 stop, odd even or no configurable parity
Operating positionVertical +/- 10 degree
Operating temperature14...104 °F (-10...40 °C) without derating 104...122 °F (40...50 °C) with derating factor

Product details

Altivar 212 drive for HVAC and pumping

The ATV212HD11N4 is a 11 kW variable speed drive from the Altivar 212 range, designed for 3-phase 380-480 V supply. It delivers 17.1 kVA apparent power at 380 V and draws 21.1 A line current at 380 V or 16.8 A at 480 V. An integrated class C2 EMC filter is built in, covering conducted emissions for most European installations without an external filter. The drive complies with IEC 61800-3 environments 1 and 2 across categories C1, C2, and C3, and carries CE marking.

Dimensions, mounting, and airflow

The drive measures 6.7 in deep, 7.09 in wide, and 9.1 in high (170 x 180 x 232 mm). It mounts vertically within ±10°, with a heat sink on the rear for thermal dissipation. Forced airflow is rated at 147 m³/h (38834 gal/h US). Operating altitude is 1000 m without derating; above that, derate 1 % per 100 m up to 3000 m, with a 2000 m limit for corner-grounded distribution networks. Pollution degree 2 per IEC 61800-5-1 applies.

Protection and control features

The drive includes an adjustable PI regulator for closed-loop process control, with speed accuracy of ±10 % of nominal slip from 0.2 Tn to Tn and torque accuracy of ±15 %. Speed range is 1 to 10. Protection covers overheating, short-circuit between motor phases, overcurrent between output phases and earth, DC bus overvoltage, input phase loss, motor thermal protection, and PTC probe input. A red LED signals DC bus energized. Analog inputs are switch-configurable: VIA accepts 0-10 V DC or 0-20 mA (10-bit, 30 kΩ voltage, 250 Ω current); VIB accepts 0-10 V DC or PTC probe (0-6 probes, 1500 Ω).

Communication and compliance

The drive is equipped with a 2-wire RS-485 physical interface using RTU protocol at 9600 or 19200 bps, with an RJ45 connector. An optional LonWorks communication card is available.

MPN
ATV212HD11N4